openwrt.narkive login

Related Search

Listing Results openwrt.narkive login

OpenWrt Wiki Log into your router running OpenWrt

9 hours ago openwrt.org Visit Login

Jul 30, 2021 · Log into your router running OpenWrt Status page Set up root password Log into your router running OpenWrt We've installed OpenWrt but now is time to get our router configured. Visit your router's administration page. No matter what the address was before, OpenWrt simplifies this by setting the administration address to be http://192.168.1.1/ .

Expires: 4 February, 2022 / 181 People Used  Show more

OpenWrtDevel Failed to execute usrlibexecloginsh

8 hours ago narkive.com Visit Login

Failed to execute /usr/libexec/login.sh Please press Enter to activate this console. Failed to execute /usr/libexec/login.sh Please press Enter to activate this console.----->8-----If I revert mentioned commit problem goes away. Any thoughts on what might be wrong here?

Expires: 3 February, 2022 / 161 People Used  Show more

How to add ubus users openwrtdevelopenwrtnarkivecom

1 hour ago narkive.com Visit Login

However, I was not able to figure out how to add additional users to the ubus. There is a login method available where you typically login with the root user and its password. This can be changed in /etc/config/rpcd, which is working fine. But there is only one user available.

Expires: 27 January, 2022 / 21 People Used  Show more

OpenWrtDevel Filter HTTPS traffic based on URL

6 hours ago narkive.com Visit Login

GG, FB login form, users can access to the other part which share IP address with login form. I tried the method: using iptables to redirect traffic to a proxy and do filtering on proxy (Tinyproxy). But I was not successful because the OAuth login form uses HTTPS, where the URL is encrypted and proxy failed to parse. Do you have any solution?--

Expires: 1 February, 2022 / 121 People Used  Show more

recap should i be able to run the OpenWRT narkive

9 hours ago narkive.com Visit Login

[OpenWrt-Devel] [PATCH] base-files utils/busybox: Make requiring login in console default for easily accessed devices started 2015-12-16 20:59:15 UTC openwrt[email protected]openwrt.org

Expires: 4 February, 2022 / 181 People Used  Show more

OpenWRT und ReadOnly narkive

8 hours ago narkive.com Visit Login

mtd: partition "rootfs" doesn't start on an erase block boundary -- force. read-only. 0x003f0000-0x00400000 : "nvram". 0x001c0000-0x003f0000 : "OpenWrt". sflash: found no supported devices. Beheben lässt sich das kurzzeitig durch resetten und erneutes Ausführen. von 'firstboot', wenn die Box im Failsave-Modus ist...
login

Expires: 3 February, 2022 / 161 People Used  Show more

OpenWrtUsers How to use LuciLUA configure narkive

9 hours ago narkive.com Visit Login

HI, I'm newbie on Luci interface and quickly viewed the Luci/Lua document . I met the problem with Luci under Openwrt and hope get your help . Following is my setup process but i don't know how to do in next step .
login

Expires: 4 February, 2022 / 181 People Used  Show more

OpenWrtUsers Is there anybody can find varlogdmesg

Just now narkive.com Visit Login

Thank you for your answer, but I only want to display the kernel message. I expect to use 'tail -f /var/log/dmesg' to read the kernel debug message on my device that without. serial console. If you want to see older kernel messages, you will have to set up syslog.
login

Expires: 26 January, 2022 / 1 People Used  Show more

Login attempt for nonexistent user on Alpine Linux narkive

8 hours ago narkive.com Visit Login

[67] Dec 01 17:03:47 Login attempt for nonexistent user from [...] I saw that I could create a configuration file in /etc/dropbear to allow root logins by it seems to be enabled by default and I would prefer just drop a binary on the device to enable ssh without changes to the system. Here is the openwrt page I'm referring:

Expires: 3 February, 2022 / 161 People Used  Show more

OpenWrtUsers UPnP client

4 hours ago narkive.com Visit Login

Continue reading on narkive: Search results for '[OpenWrt-Users] UPnP client' (newsgroups and mailing lists) 53 replies [OpenWrt-Devel] Barrier Breaker 14.07-rc1. started 2014-07-14 14:12:01 UTC. openwrt[email protected]openwrt.org. 22 replies [OpenWrt-Devel] OpenWRT IPv6 firewall ...
login

Expires: 30 January, 2022 / 81 People Used  Show more

OpenWrtDevel issues with service jailing narkive

8 hours ago narkive.com Visit Login

The reason is that. /lib/ld-musl-mips-sf.so.1 (I have ar71xx router) is not present in jail. root. As I understand, ujail parses ELF headers of the target binary and. bind-mounts all libs into jail. All but not that one. Unfortunately I. can't fix it myself, so I'd like core devs to take a look at this issue.
login

Expires: 3 February, 2022 / 161 People Used  Show more

OpenWrt Wiki Logging messages

9 hours ago openwrt.org Visit Login

May 23, 2021 · The OpenWrt system logging facility is an important debugging/monitoring capability. The standard logging facility is implemented using logd, the ubox log daemon. This is implemented as a ring buffer with fixed sized records stored in RAM . The ring buffer records can be read using logread on the router, streamed to a file or sent to a remote ...
login

Expires: 4 February, 2022 / 181 People Used  Show more

OpenWrtUsers Hotspot WiFi with Facebook integration

1 hour ago narkive.com Visit Login

What you're describing is referred to as "social login" for hotspot providers. I think Coova tried to support this several years ago in their CoovaAAA project, but this development appears to be abandoned. RADIUSDesk claims to support social login using CoovaChilli on the hotspots, although it is a full freeRADIUS + management dashboard package.

Expires: 27 January, 2022 / 21 People Used  Show more

Strongswan VPN on OpenWRT not routing packets narkive

3 hours ago narkive.com Visit Login

I can also. connect from Windows 7. An IP is allocated to the client successfully. using DHCP. Once connected I can't access anything on the network. /etc/firewall.user contains: |# This file is interpreted as shell script. # Put your custom iptables rules here, they will. # be executed with each firewall (re-)start.
login

Expires: 29 January, 2022 / 61 People Used  Show more

OpenWrtDevel PATCH v2 hostapd enable DFS support

8 hours ago narkive.com Visit Login

The latest hostapd and some of the wireless drivers support DFS, which. is required on the 5 GHz band in many countries. This patch adds the. correct option to the hostapd configuration if dfs=1 is set (along with. the country code) in the wireless configuration. It is good to see that there are more people working on DFS support.
login

Expires: 3 February, 2022 / 161 People Used  Show more

OpenWrt Wiki LOG MESSAGES

5 hours ago openwrt.org Visit Login

Jun 09, 2018 · Feb 22 23:20:11 openwrt daemon.info pppd[18196]: Sent 62343675 bytes, received 1094463306 bytes. Feb 22 23:20:11 openwrt daemon.notice pppd[18196]: Connection terminated. Feb 22 23:20:12 openwrt daemon.info pppd[18196]: Exit. NOTE: You can make pppd verbose with setting option pppd_options debug in your /etc/config/network, see network.
login

Expires: 31 January, 2022 / 101 People Used  Show more

Cant get polipo to create a disk cache on OpenWrt r41777

6 hours ago narkive.com Visit Login

I have been using the OpenWrt BB nightlies with polipo v1.1.1-1 and (although apparently correctly configured) it never writes out to the disk cache! All the strace output have provided are only from this configuration. FWIW, I have been building the OpenWrt images (i.e. openwrt-*-sysupgrade.bin) myself (but I make no changes to the polipo ...
login

Expires: 1 February, 2022 / 121 People Used  Show more

OpenWrt 183 GitHub

8 hours ago github.com Visit Login

They will be merged via staging trees then into openwrt.git. All issues should be reported at: https://bugs.openwrt.org. C 10,423 6,757 205 250 Updated Jan 23, 2022. luci Public LuCI - OpenWrt Configuration Interface JavaScript 4,011 Apache-2.0 1,875 185 (8 issues need help) 78 Updated Jan 23, 2022.
login

Expires: 3 February, 2022 / 161 People Used  Show more

OpenWrt Wiki OpenNDS Captive Portal

5 hours ago openwrt.org Visit Login

Dec 20, 2021 · OpenNDS Captive Portal Overview openNDS is a Captive Portal solution that offers an instant way to provide restricted access to the Internet. With little or no configuration, a dynamically generated and adaptive splash page sequence is automatically served. Internet access is granted by either a click to continue button, or after credential verification.

Expires: 31 January, 2022 / 101 People Used  Show more

mikrotik openwrt config

3 hours ago narkive.com Visit Login

Continue reading on narkive: Search results for 'mikrotik openwrt config' (newsgroups and mailing lists) 26 replies [openflow-discuss] (no subject) started 2012-08-15 14:49:50 UTC. [email protected] 9 replies [openflow-discuss] Question about Pantou on WRT54GL. started ...
login

Expires: 29 January, 2022 / 61 People Used  Show more

openwrt freeradius

8 hours ago narkive.com Visit Login

Jun 04, 2015 · OpenWrt Chaos Calmer 15.05.1 freeradius 2.2.8-2 Installed: freeradius2 freeradius2-common freeradius2-democerts freeradius2-mod-chap freeradius2-mod-eap freeradius2-mod-eap-mschapv2 freeradius2-mod-eap-peap freeradius2-mod-eap-tls freeradius2-mod-eap-ttls freeradius2-mod-exec freeradius2-mod-files freeradius2-mod-mschap …

Expires: 3 February, 2022 / 161 People Used  Show more

OpenWrt Wiki Welcome to the OpenWrt Project

3 hours ago openwrt.org Visit Login

Sep 04, 2021 · Welcome to the OpenWrt Project The OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device …
login

Expires: 29 January, 2022 / 61 People Used  Show more

FS2240 OpenWrt bugs OpenWrtLEDE Project Tasklist

8 hours ago openwrt.org Visit Login

Apr 17, 2019 · On OpenWRT 19.07.1, on a Fritzbox 7330, ETH2 still isn't working and ETH1 has to be connected on boot to work. Konstantinos Kostarellis commented on 05.03.2020 14:24 I can confirm that for OpenWrt 19.07.2 on Fritzbox 7320

Expires: 3 February, 2022 / 161 People Used  Show more

Please help me decide OpenWrt vs OpenBSD

Just now narkive.com Visit Login

Continue reading on narkive: Search results for 'Please help me decide: OpenWrt vs. OpenBSD' (newsgroups and mailing lists) 84 replies Future of pf / firewall in FreeBSD ? - does it have one ? started 2014-07-17 04:12:09 UTC. [email protected] 23 replies Please help me decide: OpenWrt vs. OpenBSD ...
login

Expires: 26 January, 2022 / 1 People Used  Show more

Disconnected due to excessive missing ACKs on Ath10k

2 hours ago narkive.com Visit Login

Disconnected due to excessive missing ACKs on Ath10k (OpenWRT Chaos Chalmer RC2) (too old to reply) Fernando S 2015-07-14 17:29:03 UTC. Permalink. I'm having dropouts on my TP-Link Archer C7, 2.4Ghz Wlan runs perfect, but 5Ghz is unstable (my laptop and my Ipad 4 loss connection after a couple of minutes, specially on heavy traffic). ...
login

Expires: 28 January, 2022 / 41 People Used  Show more

openwrt fsck Moteur de recherche SRCH

7 hours ago srch.fr Visit Login

https://openwrt-users.openwrt.narkive.com › ... Hi all, I have an x86 OpenWRT router that I build from source and I'm facing some ext4 problems. I'd like to make some kind of automatic filesystem check on ...
login

Expires: 2 February, 2022 / 141 People Used  Show more

Bring UCI and LUCI configuration for Bird46 to improve

4 hours ago narkive.com Visit Login

Bring UCI and LUCI configuration for Bird4/6 to improve integration with OpenWRT Eloi Carbó Solé 2014-07-20 10:05:39 UTC. Permalink. Hi everyone, I am Eloi Carbó, a student from the UPC in Catalonia, doing a Google Summer of Code [0] with the QMP project [1] team, and the support of Guifi.net [2]
login

Expires: 30 January, 2022 / 81 People Used  Show more

uhttpd log Moteur de recherche SRCH

5 hours ago srch.fr Visit Login

openwrt-devel.openwrt.narkive.com › 7yJ8A1Qu › how Search results for 'How to get uhttpd logs' (newsgroups and mailing lists) 10 replies [OpenWrt-Devel] public ssh key. started 2014-04-01 05:41:26 UTC.
login

Expires: 31 January, 2022 / 101 People Used  Show more

mrtg SNMPWALK Problem for 1361211 on narkive

4 hours ago narkive.com Visit Login

iso.3.6.1.2.1.1.7.0 = INTEGER: 78. Sounds as if the problem lies in the SNMP_util module, which is part of the MRTG installation. I have no familiarity with your OS but it may be that this module is making some assumptions about SNMP - maybe there are permissions issues on who can listen the UDP responses, for example.
login

Expires: 30 January, 2022 / 81 People Used  Show more

openwrt hotplug iface Moteur de recherche SRCH

6 hours ago srch.fr Visit Login

01/11/2021 · Hotplug extras This article relies on the following: * Accessing OpenWrt CLI * Managing configurations * Managing packages * Managing services Introduction * This instruction extends the functionality of Hotplug. * Follow the automated section for quick setup. Features * Run scripts at startup when the network is online ...
login

Expires: 1 February, 2022 / 121 People Used  Show more

Using Go on OpenWRT MIPS architecture

7 hours ago narkive.com Visit Login

For mips target, you can only use gccgo to compile Go code.
login

Expires: 2 February, 2022 / 141 People Used  Show more

OSError Errno 2 from PyInstaller on OpenWrtYun

6 hours ago narkive.com Visit Login

I've been trying to see if I could get PyInstaller to run on OpenWRT-Yun (the Linux distro used on the Arduino Yun board). The stable version (2.1) installed ok through *pip*. But running it against a "Hello World" script produces this: Traceback (most recent call last): File "/usr/bin/pyinstaller", line 9, in <module>
login

Expires: 1 February, 2022 / 121 People Used  Show more

PF 57 Hostapd Progess w 2 Radius Questions narkive

Just now narkive.com Visit Login

OpenWRT no longer publishes any 14.07 images (or at least the web server links do not work) so our only real option is 15.05, and the newer devices …
login

Expires: 26 January, 2022 / 1 People Used  Show more

Question about perl and perl modules on openwrt

7 hours ago narkive.com Visit Login

In a console screen, login as user root. Go into a CPAN shell using the command :-perl -MCPAN -e shell Then type :-install Date::Calc You may see many errors to fix while building, example - the CPAN shell will need access to program building tools such as …

Expires: 2 February, 2022 / 141 People Used  Show more

data usage metering by IP on openwrt

6 hours ago narkive.com Visit Login

OpenWrt should be entered as iptables commands in /etc/firewall.user (basically a glorified shell script, but it gets called at the appropriate point during network initialisation). I would *not* encourage the use of iptables-{save,restore} on OpenWrt, as you will be overwriting the existing rules, and any network interface
login

Expires: 1 February, 2022 / 121 People Used  Show more

Aiee segfault You should probably report this narkive

3 hours ago narkive.com Visit Login

The conditions of the test are as follows: 1) the test is done on the host or the target ( X86, ARM9 ) respectively. It is done only on one side. i.e to the localhost. 2) code is dropbear 0.50 configured ./configure -prefix=/opt. CFLAGS=-DDEBUG_TRACE. 3) the standard host keys for rsa and dss are created using dropbearkey.

Expires: 29 January, 2022 / 61 People Used  Show more

OpenWRT for beginners Full basic configuration video

2 hours ago youtube.com Visit Login

[ENG sub available] In this video, we are going to walkthrough the basic of OpenWRT, how to install OpenWRT on your router and some of the basic configuratio...

Expires: 28 January, 2022 / 41 People Used  Show more

gitarchiveopenwrtorg Git openwrtgitcommitdiff

5 hours ago openwrt.org Visit Login

diff --git a/target/linux/ps3/base-files/bin/login b/target/linux/ps3/base-files/bin/login

Expires: 31 January, 2022 / 101 People Used  Show more

gitarchiveopenwrtorg Git openwrtgitlog

8 hours ago openwrt.org Visit Login

fix build depends for wlc git-svn-id: svn://svn.openwrt.org/openwrt/[email protected] 3c298f89-4303-0410-b956-a3cf2f4a3e73
login

Expires: 3 February, 2022 / 161 People Used  Show more

How secure is OpenWrt

1 hour ago openwrt.org Visit Login

More... Security: OpenWrt's standard installation is secure by default, with Wi-Fi disabled, no poor passwords or backdoors. OpenWrt's software components are kept up-to-date, so vulnerabilities get closed shortly after they are discovered. More...

Expires: 27 January, 2022 / 21 People Used  Show more

How do I login as root user on OpenWrt

8 hours ago openwrt.org Visit Login

At that page you should see a login page: (correct as of Barrier Breaker) As you'll see, there's a notification that “root” user's password is not set. root is the username of the main administrative user on OpenWrt. We'll need to set that after we login. Log in with the username of root and leave the password field empty.

Expires: 3 February, 2022 / 161 People Used  Show more

How can I check the system information of an OpenWrt router

9 hours ago openwrt.org Visit Login

In the first screen shot, you can see some basic system information like the version of OpenWrt and the web interface packages of OpenWrt, which is named LuCI. Additionally, you can see the uptime for the router since last reboot, the current clock time on the router and how much of the router's processor is used (“load”).

Expires: 4 February, 2022 / 181 People Used  Show more

What is the OpenWrt system logging facility

3 hours ago openwrt.org Visit Login

The openwrt system logging facility is an important debugging/monitoring capability. This document describes common support for the LEDE 17 implementations. It appears there have been some changes in (recently) released Openwrt 18 branch. The standard logging facility is implemented using logd, the ubox log daemon.

Expires: 29 January, 2022 / 61 People Used  Show more

Please leave your comments here:

Trending

Frequently Asked Questions

How secure is OpenWrt?

More... Security: OpenWrt's standard installation is secure by default, with Wi-Fi disabled, no poor passwords or backdoors. OpenWrt's software components are kept up-to-date, so vulnerabilities get closed shortly after they are discovered. More...

How do I login as root user on OpenWrt?

At that page you should see a login page: (correct as of Barrier Breaker) As you'll see, there's a notification that “root” user's password is not set. root is the username of the main administrative user on OpenWrt. We'll need to set that after we login. Log in with the username of root and leave the password field empty.

How can I check the system information of an OpenWrt router?

In the first screen shot, you can see some basic system information like the version of OpenWrt and the web interface packages of OpenWrt, which is named LuCI. Additionally, you can see the uptime for the router since last reboot, the current clock time on the router and how much of the router's processor is used (“load”).

What is the OpenWrt system logging facility?

The openwrt system logging facility is an important debugging/monitoring capability. This document describes common support for the LEDE 17 implementations. It appears there have been some changes in (recently) released Openwrt 18 branch. The standard logging facility is implemented using logd, the ubox log daemon.

Blog

If you want to login to Instagram Lite Login, then there is a very easy way to do it